How to play ↓

Alpine Weather Post

A full-3D mountain weather station puzzle with 24 seeded stations. Carry the sensor mast and a radiation shield to open ground inside the cable limit, away from boulders and sun-heated slabs, then level the tripod feet, point the wind vane at true north, set the shield height and service the sensors. When every check is green, SEND the reading from the logger. Later stations add steeper slopes, gusty wind shifts, heat from rocks, snow-blocked shields and iced sensors that need servicing. Tilt is drawn exaggerated so it is easy to read. This is one mountain with different seeded stations, not 24 separate environments.

How to play

  1. Walk with the stick or WASD, then PICK UP or press Enter to carry the mast and place it on a good spot (the ring shows green when it is valid).
  2. Use NEXT or Tab to inspect each part. Hold the arrow buttons to raise a foot, turn the vane or move the shield height, and hold SERVICE or Space to clear ice.
  3. When all five chips are green, walk to the logger and press SEND or F. Esc pauses, Q toggles the view and R retries outside rooms.

Tips

Questions

How do rooms work?

Three or more friends can compete on the same seeded station in the existing room lobby. Scores come from each player's own sent reading. The shared computer is a scoreboard opponent. A room run ends once and cannot be retried locally.

What saves?

Best scores, unlocked stations and successful UTC Daily streaks save on this device. Daily success counts at most once per date. Active stations are not saved.

Why can't I send?

One of the five readings is outside tolerance. Check the chips and the hint at the top.

What if the scene fails to render?

The game shows a recovery panel. Enable WebGL and hardware acceleration, close graphics-heavy tabs and reload.

Host a GamePlay with AI

More games like this

↑ Back to the game